ET 开发人员参考 |
Chart.GetChartElement 方法 |
语法
表达式.GetChartElement(x, y, ElementID, Arg1, Arg2)
表达式 一个代表 Chart 对象的变量。
参数
名称 | 必选/可选 | 数据类型 | 说明 |
---|---|---|---|
x | 必选 | Long | 图表元素的 X 坐标。 |
y | 必选 | Long | 图表元素的 Y 坐标。 |
ElementID | 必选 | Long | 该方法返回时,此参数包含指定坐标的图表元素的 XLChartItem 值。有关详细信息,请参阅“备注”部分。 |
Arg1 | 必选 | Long | 该方法返回时,该参数包含与图表元素相关的信息。有关详细信息,请参阅“备注”部分。 |
Arg2 | 必选 | Long | 该方法返回时,该参数包含与图表元素相关的信息。有关详细信息,请参阅“备注”部分。 |
说明
本方法返回的 ElementID 值决定了 Arg1 和 Arg2 所包含的信息,如下表所示。
ElementID 常量 | 常量值 | Arg1 | Arg2 |
---|---|---|---|
xlAxis | 21 | AxisIndex | AxisType |
xlAxisTitle | 17 | AxisIndex | AxisType |
xlDisplayUnitLabel | 30 | AxisIndex | AxisType |
xlMajorGridlines | 15 | AxisIndex | AxisType |
xlMinorGridlines | 16 | AxisIndex | AxisType |
xlPivotChartDropZone | 32 | DropZoneType | 无 |
xlPivotChartFieldButton | 31 | DropZoneType | PivotFieldIndex |
xlDownBars | 20 | GroupIndex | 无 |
xlDropLines | 26 | GroupIndex | 无 |
xlHiLoLines | 25 | GroupIndex | 无 |
xlRadarAxisLabels | 27 | GroupIndex | 无 |
xlSeriesLines | 22 | GroupIndex | 无 |
xlUpBars | 18 | GroupIndex | 无 |
xlChartArea | 2 | 无 | 无 |
xlChartTitle | 4 | 无 | 无 |
xlCorners | 6 | 无 | 无 |
xlDataTable | 7 | 无 | 无 |
xlFloor | 23 | 无 | 无 |
xlLeaderLines | 29 | 无 | 无 |
xlLegend | 24 | 无 | 无 |
xlNothing | 28 | 无 | 无 |
xlPlotArea | 19 | 无 | 无 |
xlWalls | 5 | 无 | 无 |
xlDataLabel | 7 | SeriesIndex | PointIndex |
xlErrorBars | 9 | SeriesIndex | 无 |
xlLegendEntry | 12 | SeriesIndex | 无 |
xlLegendKey | 13 | SeriesIndex | 无 |
xlSeries | 3 | SeriesIndex | PointIndex |
xlShape | 14 | ShapeIndex | 无 |
xlTrendline | 8 | SeriesIndex | TrendLineIndex |
xlXErrorBars | 10 | SeriesIndex | 无 |
xlYErrorBars | 11 | SeriesIndex | 无 |
下表说明了本方法返回后,参数 Arg1 和 Arg2 的含义。
参数 | 说明 |
---|---|
AxisIndex | 指定坐标轴是主坐标轴还是次坐标轴。可为以下 XlAxisGroup 常量之一:xlPrimary 或 xlSecondary。 |
AxisType | 指定坐标轴类型。可为以下 XlAxisType 常量之一:xlCategory、xlSeriesAxis 或 xlValue。 |
DropZoneType | 指定拖放区的类型:列、数据、页或行字段。可为以下 XlPivotFieldOrientation 常量之一:xlColumnField、xlDataField、xlPageField 或 xlRowField。列和行字段常量分别指定了系列和分类字段。 |
GroupIndex | 指定特定图表组在 ChartGroups 集合内的偏移量。 |
PivotFieldIndex | 指定特定列(数据系列)、数据、页或行(类别)字段在 PivotFields 集合中的偏移量。如果拖放区域类型为 xlDataField,则返回 -1。 |
PointIndex | 指定系列中的特定点在 Points 集合中的偏移量。-1 表示选定了所有数据点。 |
SeriesIndex | 指定特定系列在 Series 集合中的偏移量。 |
ShapeIndex | 指定特定形状在 Shapes 集合中的偏移量。 |
TrendlineIndex | 指定某个系列中特定趋势线在 Trendlines 集合中的偏移量。 |
示例
当鼠标移动到图表图例上时,本示例发出警告。
示例代码 |
---|
|